TRACE

For other uses, see Trace.

Transition Region and Coronal Explorer

Transition Region and Coronal Explorer satellite
Names	Explorer-73 SMEX-4 TRACE
Mission type	Heliophysics
Operator	NASA / GSFC
COSPAR ID	1998-020A
SATCAT no.	25280
Website	TRACE
Mission duration	1 year (planned) 12 years, 2 months and 19 days (achieved)
Spacecraft properties
Spacecraft	Explorer LXXIII
Spacecraft type	Transition Region and Coronal Explorer
Bus	TRACE
Manufacturer	Goddard Space Flight Center
Launch mass	250 kg (550 lb)
Dimensions	1.9 × 1.1 m (6 ft 3 in × 3 ft 7 in)
Power	220 watts
Start of mission
Launch date	2 April 1998, 02:42:39 UTC
Rocket	Pegasus XL (F21)
Launch site	Vandenberg, Stargazer
Contractor	Orbital Sciences Corporation
Entered service	20 April 1998
End of mission
Deactivated	21 June 2010, 23:56 UTC
Last contact	21 June 2010
Orbital parameters
Reference system	Geocentric orbit
Regime	Sun-synchronous orbit
Perigee altitude	520.0 km (323.1 mi)
Apogee altitude	547.2 km (340.0 mi)
Inclination	97.84°
Period	95.48 minutes
Instruments
TRACE Imaging Telescope
TRACE mission patch SMEX program Explorer program

Transition Region and Coronal Explorer (TRACE, or Explorer 73, SMEX-4) was a NASA heliophysics and solar observatory designed to investigate the connections between fine-scale magnetic fields and the associated plasma structures on the Sun by providing high-resolution images and observation of the solar photosphere, the transition region, and the solar corona. A main focus of the TRACE instrument is the fine structure of coronal loops low in the solar atmosphere. TRACE is the third spacecraft in the Small Explorer program, launched on 2 April 1998, and obtained its last science image on 21 June 2010, at 23:56 UTC.

Mission

The Transition Region and Coronal Explorer (TRACE) is a NASA small explorer mission designed to examine the three-dimensional magnetic structures which emerge through the Sun's photosphere (the visible surface of the Sun) and define both the geometry and dynamics of the upper solar atmosphere (the transition region and corona). Its primary science objectives are to: (1) follow the evolution of magnetic field structures from the solar interior to the corona; (2) investigate the mechanisms of the heating of the outer solar atmosphere; and, (3) determine the triggers and onset of solar flares and mass ejections. TRACE is a single-instrument, three-axis stabilized spacecraft. The spacecraft attitude control system (ACS) utilizes three magnetic-torquer coils, a digital Sun sensor, six coarse Sun sensors, a three-axis magnetometer, four reaction wheels, and three two-axis inertial gyros to maintain pointing. In science mode, the spacecraft uses an instrument-provided guide telescope as a fine guidance sensor to provide a pointing accuracy of less than 5 arcseconds. Power is provided to the spacecraft through the use of four panels of gallium arsenide (GaAs) solar cells with a total area of 2 m² (22 sq ft). The solar array actually produces power of around 220 watts, 85 W of which is used each orbit by the spacecraft and 35 W of which is used by the instrument each orbit. The remaining power is used for operational and decontamination heating of the spacecraft and telescope. A 9 A-hour nickel–cadmium battery (NiCd) provides energy during time when the spacecraft is in the Earth's shadow. Communications are provided via a 5 W S-band transponder, providing up to 2.25 Mbit/s downlink data transmission and 2 kbit/s uplink. Data are transmitted up to six times daily. Data are stored onboard using a solid-state recorder capable of holding up to 300 MB. The command and data handling system uses a 32-bit 80386/80387 processor.

Spacecraft

The satellite was built by NASA's Goddard Space Flight Center. Its telescope was constructed by a consortium led by Lockheed Martin's Advanced Technology Center. The optics were designed and built to a State of the art surface finish by the Smithsonian Astrophysical Observatory (SAO). The telescope has a 30 cm (12 in) aperture and 1024 × 1024 charge-coupled device (CCD) detector giving an 8.5 arcminute field of view (FoV). The telescope is designed to take correlated images in a range of wavelengths from visible light through the Lyman alpha line to far ultraviolet. The different wavelength passbands correspond to plasma emission temperatures from 4,000 to 4,000,000 K. The optics use a special multilayer technique to focus the difficult-to-reflect extreme ultraviolet (EUV) light; the technique was first used for solar imaging in the late 1980s and 1990s, notably by the MSSTA and NIXT sounding rocket payloads.

Experiment

TRACE Imaging Telescope

The telescope is of Cassegrain design, 1.6 m (5 ft 3 in) long with an aperture of 30 cm (12 in). The focal length is 8.66 m (28.4 ft). The field of view of the telescope is 8.5 x 8.5 arcminutes with a spatial resolution of one arcsecond. The light is focused on a 1024 x 1024 element CCD detector (0.5 arcseconds/pixel). The temporal resolution of the instrument is less than 1 second, although the nominal temporal resolution is 5 seconds. Exposure times for observations range between 2 ms and 260 seconds. The primary and secondary mirrors have normal-incidence coatings specially designed for EUV and UV observations which divide the mirrors into quadrants. These segmented coatings are designed to provide identically sized and perfectly coaligned images. Which mirror quadrant is used for an observation is determined by the position of a quadrant selector shutter mechanism, positioned behind the entrance aperture. Three of the mirror coatings provide for observations in specific iron emission bands: Fe IX (central wavelength/bandwidth: 17.3 nm/0.64 nm); Fe XII (19.5 nm/0.65 nm); and Fe XV (28.4 nm/1.07 nm). The final mirror coating allows broadband observations in the ultraviolet (centered on 500 nm). Further selection of observations in the UV can be made through the use of a filter wheel, mounted in front of the CCD. The filter wheel permits continuum observations (170 nm/20 nm) as well as observations in emission bands for C (carbon) I and Fe II (160 nm/27.5 nm), C IV (155 nm/2 nm), and H (Hydrogen) I (Lyman-alpha) (121.6 nm/8.4 nm). The TRACE primary mirror assembly is based on primary mirror support assemblies used in SWATH, a small explorer developed for the U.S. Air Force, and NIXT, a set of rocket flights flown by the Smithsonian Astrophysical Observatory (SAO) five times between 1983 and 1993. Many of the designs and some of the space flight hardware from the MDI instrument on Solar and Heliospheric Observatory (SoHO) was also used.

Image gallery

• 
  TRACE image of some typical million Kelvin loops
• 
  Image of a sunspot taken by TRACE
• 
  TRACE mosaic of the full-disk Sun

See also

• Explorer program

External links

Media related to TRACE at Wikimedia Commons

• TRACE website by Lockheed Martin
• TRACE Data Center by Lockheed Martin
• TRACE website (archived) by NASA's Goddard Space Flight Center
• TRACE movies archive by Lockheed Martin